Boron carbide nozzle offer the longest life with optimum air abrasive use. Boron carbide is ideal for aggressive abrasive such aluminum oxide and selected mineral aggregates when rough handling can be avoided. Boron carbide will typically outwear tungsten carbide by five to ten times and silicon carbide by three to five times. Boron carbide nozzles are recommended for use with abrasive such as aluminum oxide.

Long venturi style nozzles yield about a 40% greater production rate than straight boron nozzles. The internally tapered design of the venture nozzle accelerates and evenly distributes the abrasive over the entire blast pattern. These nozzles are designed for use with a 1-1/4" I.D. blast for maximum cutting on hard-to-clean surface. BR-VSA/B Series boron carbide Long venture nozzles This nozzle is designed for job where the nozzle is generally 8 or more inches away from the surface being blasted. For high production jobs-expect longer nozzle life. Aluminum or nylon jacket and threads.

The double venturi nozzles offer a 35% larger blast pattern than a standard long venturi with only a very slight loss in abrasive velocity. Designed to be used on jobs where medium blast action is required with a more even dispersion of abrasive throughout the larger blast pattern. Excellent for plastic or agricultural abrasives.

Straight bore nozzles are made for close range spot blasting. With small blast patterns and little overblast, they are good for cleaning small areas: weldments, grillwork, railings. Short straight bore nozzles yield a narrow pattern with little overblast.

BR-SBB Series boron carbide straight bore nozzles Boron carbide liner with aluminum jacket and threads. Thread Style: 3/4 N.P.S.M

These nozzles are excellent for getting inside tight places like bridge lattice, behind flanges or inside pipe. Many operators waste abrasive and time waiting for ricochet to get the job done. No nozzle tool chest should be without an angle nozzle. These nozzles are boron carbide lined, with brass or aluminum threads, featuring blast outputs at 45 degree , 90 degree or 135 degree relative to the input openings. Available with single, double, or triple outlets. Special designs available upon request.

Internal Pipe Blasters are designed to Abrasive Blast Clean the internal surfaces of pipe structures. Internal pipe cleaning problems are quickly solved with the Airblast range of pipe cleaning tools. These are designed to blast clean the interior of pipes and tubes removing millscale, rust, carbon and paint coatings. For pipes ranging from 1/2" to 12" (13 mm to 305 mm).

The resilient nylon material provides a lightweight receptacle for your nozzle. The tight tolerances offer consistent threading, be it 1-1/4" NPS or heavy-duty 50mm threads. Offered in sizes to fit 3/4", 1" and 1-1/4" I.D. blast hose